Dhoopbatti Making Machine

• Machine Speed: 60 piece/minute
• Production: 40000 pieces/day
• Size: 6 mm, 8 mm, 10 mm.
• Required power: 2 HP three phase/single phase.
• Length of Dhoopbatti: 3", 4", 2"
• Machine weight: 175 Kg.
• Free: Training of operating and general maintenance of the machine.
• Free: 1 tool set, nozzle and rockets
• Warranty: 6 months.
• Easy to operating & low maintenance, fully automatic machine
• Made in India.

• · Machine Speed: 200 nos/minute depends on size.
• · Electric control panel with variable speed.
• · Production: 200 kg. /12 Hr. (Depends on size)
• · Required power: 2.5 HP, 3 Phase.
• · Length of Stick: you can change cutting blade for different size.
• · Mould size: 10 or 15 cavities. (1 attached in machine)
• · Hydraulic operating system with 50 tone capacity
• · Hydraulic Oil : Required 50 liter (Client’s scope).
• · Oil tank: 50 liters capacity
• · Conveyor system in built.
• · Machine Size: 3100 × 600 × 1200 mm (10.1 × 2 × 4 Feet)
• · Machine weight: 300 Kg.
• · Free: Material mixing formula, contacts of raw material ,
•  Training of machine operating and general maintenance.
• · Warranty: 9 months only on main motor and drive.
• · This machine designed by our Engineer.
• · This machine is produced by our technical staff.
• · (Not import from another country.)
• · Lifetime telephonic technical support free after sales.
• · Lifetime payable service available
• · Easy to operating & low maintenance.
• · Made in India.

Wet Dhoop Stick Making Machine. (Auto Cutter)

•  Machine Speed: 200 nos/minute depends on size.
•  Electric control panel with variable speed.
•  Production: 200 kg. /12 Hr. (Depends on size)
•  Required power: 2.5 HP, 3 Phase.
•  Length of Stick: you can change cutting blade for different size.
•  Mould size: 10 or 15 cavities. (1 attached in machine)
•  Hydraulic operating system with 50 tone capacity
•  Hydraulic Oil : Required 50 liter (Client’s scope).
•  Oil tank: 50 liters capacity
•  Conveyor system in built.
•  Machine Size: 3100 × 600 × 1200 mm (10.1 × 2 × 4 Feet)
•  Machine weight: 300 Kg.
•  Free: Material mixing formula, contacts of raw material ,
• Training of machine operating and general maintenance.
•  Warranty: 9 months only on main motor and drive.
•  This machine designed by our Engineer.
•  This machine is produced by our technical staff.
•  (Not import from another country.)
•  Lifetime telephonic technical support free after sales.
•  Lifetime payable service available
•  Easy to operating & low maintenance.
•  Made in India.

•  Machine Speed: 200 nos/minute depends on size.
•  Electric control panel with variable speed.
•  Production: 200 kg. /12 Hr. (Depends on size)
•  Required power: 2.5 HP, 3 Phase.
•  Length of Stick: you can change cutting blade for different size.
•  Mould size: 10 or 15 cavities. (1 attached in machine)
•  Hydraulic operating system with 50 tone capacity
•  Hydraulic Oil : Required 50 liter (Client’s scope).
•  Oil tank: 50 liters capacity
•  Conveyor system in built.
•  Machine Size: 3100 × 600 × 1200 mm (10.1 × 2 × 4 Feet)
•  Machine weight: 300 Kg.
•  Free: Material mixing formula, contacts of raw material ,
• Training of machine operating and general maintenance.
•  Warranty: 9 months only on main motor and drive.
•  This machine designed by our Engineer.
•  This machine is produced by our technical staff.
•  (Not import from another country.)
•  Lifetime telephonic technical support free after sales.
•  Lifetime payable service available
•  Easy to operating & low maintenance.
•  Made in India.

•  Machine Speed: 200 nos/minute depends on size.
•  Electric control panel with variable speed.
•  Production: 200 kg. /12 Hr. (Depends on size)
•  Required power: 2.5 HP, 3 Phase.
•  Length of Stick: you can change cutting blade for different size.
•  Mould size: 10 or 15 cavities. (1 attached in machine)
•  Hydraulic operating system with 50 tone capacity
•  Hydraulic Oil : Required 50 liter (Client’s scope).
•  Oil tank: 50 liters capacity
•  Conveyor system in built.
•  Machine Size: 3100 × 600 × 1200 mm (10.1 × 2 × 4 Feet)
•  Machine weight: 300 Kg.
•  Free: Material mixing formula, contacts of raw material ,
• Training of machine operating and general maintenance.
•  Warranty: 9 months only on main motor and drive.
•  This machine designed by our Engineer.
•  This machine is produced by our technical staff.
•  (Not import from another country.)
•  Lifetime telephonic technical support free after sales.
•  Lifetime payable service available
•  Easy to operating & low maintenance.
•  Made in India.

Beware from duplication and cheater.

Nobody our Ex-partner

Machine design copyright by sohamtex engineers 

• Machine Speed: 250 - 350 nos/minute (depends on size & Material).
• Electric control panel with variable speed.
• Production: 300-400 kg. /8 Hr. (Depends on size & Material)
• Required power: 3.5 HP, 3 Phase.

·         Require Compressor: For Dry Dhoop1 HP & Wet Dhoop 2 HP (By Client’s Scope)

• Length of Stick: you can change cutting blade for different size.
• Mould size: 32 cavities as per size of sample (1 attached in machine)

·         Hydraulic operating system with 40 tone capacity
·         Hydraulic Oil : Required 30 liter (Client’s scope).

·         Auto Cutter System available

• Oil tank: 35 liters capacity
• Conveyor system in built.

·         Machine Size: 9 * 3 * 3.5 FEET

·         Machine weight: 350 Kg.

• Free: Material mixing formula, contacts of raw material supplier,
             Training of machine operating and general maintenance.
• Warranty: 9 months on main motor and drive.
• This machine designed by our Engineer.
• This machine is produced by our technical staff.
• (Not import from another country.)
• Lifetime telephonic technical support free after sales.
• Lifetime payable service available 
• Easy to operating & low maintenance.
• Made in India.

Beware from duplication and cheater.

Nobody our Ex-partner

Machine design copyright by sohamtex engineers

 Machine Speed: 250 - 350 nos/minute (depends on size & Material).

• Electric control panel with variable speed.
• Production: 300-400 kg. /8 Hr. (Depends on size & Material)
• Required power: 3.5 HP, 3 Phase.

·         Require Compressor: For Dry Dhoop1 HP & Wet Dhoop 2 HP (By Client’s Scope)

• Length of Stick: you can change cutting blade for different size.
• Mould size: 32 cavities as per size of sample (1 attached in machine)

·         Hydraulic operating system with 40 tone capacity

·         Hydraulic Oil : Required 30 liter (Client’s scope).

·         Auto Cutter System available

• Oil tank: 35 liters capacity
• Conveyor system in built.

·         Machine Size: 9 * 3 * 3.5 FEET

·         Machine weight: 350 Kg.

• Free: Material mixing formula, contacts of raw material supplier,
             Training of machine operating and general maintenance.
• Warranty: 9 months on main motor and drive.
• This machine designed by our Engineer.
• This machine is produced by our technical staff.
• (Not import from another country.)
• Lifetime telephonic technical support free after sales.
• Lifetime payable service available 
• Easy to operating & low maintenance.
• Made in India.

Beware from duplication and cheater.

Nobody our Ex-partner

Machine design copyright by sohamtex engineers

 Machine Speed: 250 - 350 nos/minute (depends on size & Material).

• Electric control panel with variable speed.
• Production: 300-400 kg. /8 Hr. (Depends on size & Material)
• Required power: 3.5 HP, 3 Phase.

·         Require Compressor: For Dry Dhoop1 HP & Wet Dhoop 2 HP (By Client’s Scope)

• Length of Stick: you can change cutting blade for different size.
• Mould size: 32 cavities as per size of sample (1 attached in machine)

·         Hydraulic operating system with 40 tone capacity

·         Hydraulic Oil : Required 30 liter (Client’s scope).

·         Auto Cutter System available

• Oil tank: 35 liters capacity
• Conveyor system in built.

·         Machine Size: 9 * 3 * 3.5 FEET

·         Machine weight: 350 Kg.

• Free: Material mixing formula, contacts of raw material supplier,
             Training of machine operating and general maintenance.
• Warranty: 9 months on main motor and drive.
• This machine designed by our Engineer.
• This machine is produced by our technical staff.
• (Not import from another country.)
• Lifetime telephonic technical support free after sales.
• Lifetime payable service available 
• Easy to operating & low maintenance.
• Made in India.

Sambrani Cup Dhoop Machine

Features:

• Machine Speed : 4000 Nos./ 8 HR.
• Production of 1 stroke of machine : 25 Nos.
• Machine size : 600 x 500 x 1800 height
• Required Power : 2 HP/ 3 Phase
• Cups mould 3 plate design
• Mould plate size : 300 x 300 mm
• Total cavity of mould 25 Nos.
• Hydraulic Oil : Hydraulic servo 68 oil required (Client’s Scope)
• Heavy Rigid Structure
• Warranty :9 Months warranty in main motor
• Free: Training of machine operation and general maintenance.
  Free: 1 tool set.
• This machine designed by our Engineer.
• This machine is produced by our technical staff.
• (Not import from another country.)
• Easy to operate low maintenance
• Lifetime telephonic technical support free after sales.
• Lifetime payable service available
• Made in India.